Main parameter | Description
| Remark |
Reference distance
| 10km
| Test condition:clear and open area, antenna gain: 5dBi,antenna height: 2m,air data rate: 2.4 kbps |
FIFO
| 256Byte
| Maximum length of single send |
Crystal Oscillator
| 32MHz
| Passive crystals |
Protocol
| LoRa | FSK/GFSK/MSK/GMSK/OOK |
Package
| SMD
| Spacing of 2.54 mm |
Interface
| 2.54mm
| Sample hole |
Communication interface
| SPI
| 0~10Mbps
|
Size
| 24 * 38.5 mm
| - |
Antenna
| Sample hole / IPEX
| 50 ohm impedance
|
Main parameter | Min | Type | Max | Unit | Remark |
Operating voltage
| 3.3
| 5 | 5.5 | V | ≥5.5 V ensures output power
|
Communication level
| - | 3.3
| - | V
| - |
Operating temperature
| -40
| - | +85
| ℃
| Industrial grade
|
Operating frequency
| 850
| 868/915
| 931
| MHz
| - |
TX current
| - | 650 | - | mA
| - |
RX current
| - | 19
| - | mA
| - |
Sleep current
| - | 2 | - | μA
| - |
Max TX power
| - | 30 | - | dBm
| - |
Receiving sensitivity
| -123
| -124
| -125
| dBm
| Air data rate is 1.2 kbps |

Pin No. |
Item |
Direction |
Description |
1 | GND | - | Ground |
2 | GND | - | Ground |
3 | GND | - | Ground |
4 | GND | - | Ground |
5 | GND | - | Ground |
6 | RXEN | Input | RF switch receiving control pin, connected to external MCU IO, high level effective |
7 | TXEN | Input | RF switch receiving control pin, connected to external MCU IO, high level effective |
8 | DIO2 | Input/Output | General IO port (see SX1278 manual for details) |
9 | VCC | - | Power supply, range 3.3 ~ 5.5V (external ceramic filter capacitor is recommended) |
10 | VCC | - | Power supply, range 3.3 ~ 5.5V (external ceramic filter capacitor is recommended) |
11 | GND | - | Ground |
12 | GND | - | Ground |
13 | NC | - | Suspend |
14 | DIO3 | Input/Output | General IO port (see SX1278 manual for details) |
15 | DIO4 | Input/Output | General IO port (see SX1278 manual for details) |
16 | DIO5 | Input/Output | General IO port (see SX1278 manual for details) |
17 | GND | - | Ground |
18 | GND | - | Ground |
19 | DIO1 | Input/Output | General IO port (see SX1278 manual for details) |
20 | DIO0 | Input/Output | General IO port (see SX1278 manual for details) |
21 | NRST | Input | Chip reset trigger input pin |
22 | MISO | Output | SPI data output pin |
23 | MOSI | Input | SPI data output pin |
24 | SCLK | Input | SPI data output pin |
25 | NSS | Input | the module chip selects the pin used to start an SPI communication |
26 | GND | - | Ground |
27 | ANT | - | Antenna interface, Sample hole (50Ω characteristic impedance) |
28 | GND | - | Ground |