RF Parameter |
Value |
Remark |
Working frequency | 410~441 MHz | Default: 433MHz |
Transmitting power | 19~20 dBm | - |
Receiving sensitivity | -144~147 dBm | Air data rate: 2.4kbps |
Air data rate | 2.4k~19.2kbps | - |
Test distance | 3000 meter | In open and clear air, with maximum power, 5dBi antenna gain, height of 2.5m,air data rate: 2.4kbps |

Pin No. |
Pin Item |
Pin Direction |
Pin Application |
1 | M0 | input (very weak pull-up) | cooperates with M1 to determine the 4 working modes of the module. (Cannot be left floating, can be grounded if not used) |
2 | M1 | input (very weak pull-up) | cooperates with M0 to determine the 4 working modes of the module. (Cannot be left floating, can be grounded if not used) |
3 | RXD | input | TTL serial input, connect to external TXD output pin; Can be configured as open-drain or pull-up input, see parameter settings for details. |
4 | TXD | output | TTL serial output, connect to external RXD input pin;Can be configured as open-drain or push-pull output, see parameter settings for details. |
5 | AUX | outputs | Used to indicate the working status of the module; (can be left floating)The user wakes up the external MCU, and outputs a low level during the power-on self-test initialization;It can be configured as open-drain output or push-pull output, see parameter settings for details. |
6 | VCC | input | Positive reference of module power supply, voltage range: 2.3~5.5V DC |
7 | GND | Input | Module ground wire |
8 | Fixing | | holes Fixing holes |
9 | Fixing | | hole Fixing hole |
10 | Fixing | | hole Fixing hole |